Welcome to my New Project...

Where do you start a new project? I started with a door.

I am not sure if starting with a door is odd, but that is what I have done. I do have a plan for this next house, but I had such a clear picture in my head of one of the doors, I just built it.

Unfortunately I didn't take any photos. The door, or doors are made from card stock that I scored to look like planks. I cut the hole for the window slightly larger smaller on the back and then made the frame on the front separate which allowed me to paint the door before putting the 'glass' in. 

I couldn't find a handle that I liked, so made this handle using a small curved section of a fancy cut mdf piece meant for balustrades. I glued it onto a piece of card and painting the whole thing black and then rubbed a bit of copper ink over it. It is much less shiny than in this photo and will pass for a cast iron handle, I think.

You may notice the 'glass' in the photo above is clear. That was my first attempt but I wasn't completely happy with it. The cathedral style of glass is made by smearing glue over the plexiglass - the method works fine, but it wasn't the look I was after. 

I really wanted coloured glass and after a bit of pondering, I decided to try mixing in some coloured ink. I also decided to use gloss modge podge instead of the glue. The tacky glue had dried beautifully clear but stayed slightly rubbery so I was thinking dust would stick to it over time and be difficult to clean off. 

This time, instead of smearing the glue on in a scrolling pattern, I put on rows of dots. I remember seeing glass panes that looked like rows of bottle bases once and thought it would look interesting. 

I managed to carefully pry the frame away and replace the cathedral glass with my coloured glass and am so happy with the result. 

(By the way: The glass is an afterthought by the current owner, set into an original door to 'fancy it up' and add a bit of interest - but more about that later).

and the inside. The doorframe is basswood and the stone step is made from balsa wood. The little latch that keeps the half-door in place works and to hold the top of the door, I made a tiny little working wire hook and eye. Looking at it now, I realize I will need to add some kind of locking mechanism so the shop owner can lock-up shop at night. 

It all went so well until the hinges. I got them all on, all glued, all the tiny nails in and then.. one of turning parts snapped on the half-door. Of course it happened after the glue had set. Short of pulling it all apart, I have decided to live with it and glued the broken part in place. 

It is disappointing but reality is that it will never be opened and closed I (and you) am the only one who knows it is stuck. 

So what is this new house? As you can see I have started to build something, but I will wait and show you more soon, when it actually will look like something other than a wooden box. I do hope to get to work on it some more this coming weekend. 

Thank you all for stopping by.

Anna 

 "All good things take time..." As we all know, all too well - that goes for small things too but I have finally managed to finish the rug for T. Tjørngren's living room. 

I hate to think how long it took me and after all that, you can hardly see it with the furniture in place.

Up until then, he had been borrowing a smaller rug that I embroidered years ago, but this one is a much better fit. 

I couldn't find a rug pattern I liked to the dimensions I needed so I made the pattern or chart using a free online program that I have now happily forgotten what was called.  

The next bit might not mean an awful lot for those of you who don't stitch, but I thought I would share it anyway. Rather than using silk gauze which is most often used for miniature needlepoint, I have worked this rug in full cross stitch onto calico (quilter's muslin). 1) I didn't have any silk gauze; 2) the calico I did have, had a weave similar to Aida cloth only very tiny, making it ideal for mini stitching; 3) by stitching on calico, I was able to make nicely fringed ends which is not really possible with gauze, I don't think. 

I almost regretted using this fabric halfway more than once while stitching it because working full cross stitch instead of petit point, means twice as many stitches - As if there wasn't enough already!

Here you can see it in all its mini glory. Now that it is done, I am so happy, I persevered. 

~ ~ Back in the Loft ~ ~ 

There was so much clutter on top of the chest of drawers, that I made Karl Johan a small shelf to hang above it. Not that he has a lot of stuff, but at least he can now put his toiletries a bit more out of the way.  

So what was the plan for the small drawers? As you can see, Karl Johan has pulled one out and just piled the contents into the empty hole.

Huibrecht was absolutely right when he guessed it had something to do with birds. You see, Karl Johan had found a nest with two tiny baby birds that had blown out of a tree...

He brought the nest home and the only thing suitable he could find to put the nest in was of course his top drawer. Very sensibly has has lined it with a bit of news paper.

To make sure the wee babies stay nice and warm, the drawer sits on the floor next to the stove. I am not sure what he intends to do once they get bigger and start to move about - for now it is ok, cause they are tiny....

... yes, very, very tiny. That big, fat finger is my pinkie. It was fiddley and fun to make. I wasn't even sure if I could pull it off. I haven't made nests.. or birds.. or any animal for that matter before... so what on earth was I thinking? 

My wee birds are fare from perfect. The beaks are wonky and they don't have any legs but overall it they worked out better than I had hoped. I guess sometimes you just have to dive in and give it a go and see what happens. That is what I love so much about making tiny things.

On that note; I have started something new... but I will start a fresh post for that.

Until then - take care and thanks for stopping by.

Anna X